Acoustic Radiation Research Articles

Optical coherence elastography under homolateral parallel acoustic radiation force excitation for ocular elasticity quantification.

Alteration in the elastic properties of biological tissues may indicate changes in the structure and components. Acoustic radiation force optical coherence elastography (ARF-OCE) can assess the elastic properties of the ocular tissues non-invasively. However, coupling the ultrasound beam and the optical beam remains challenging. In this Letter, we proposed an OCE method incorporating homolateral parallel ARF excitation for measuring the elasticity of the ocular tissues. An acoustic-optic coupling unit was established to reflect the ultrasound beam while transmitting the light beam. The ARF excited the ocular tissue in the direction parallel to the light beam from the same side of the light beam. We demonstrated the method on the agar phantoms, the porcine cornea, and the porcine retina. The results show that the ARF-OCE method can measure the elasticity of the cornea and the retina, resulting in higher detection sensitivity and a more extensive scanning range.

Diagnostic performance of acoustic radiation force impulse for acute pancreatitis: A meta-analysis.

The objective of this meta-analysis is to evaluate the diagnostic performance of acoustic radiation force impulse (ARFI) in acute pancreatitis (AP) patients. PubMed, Web of Science, Embase, Wanfang, Chinese Biological Medicine databases, and Chinese Biomedical Literature Service System were searched for relevant studies to explore the potential diagnostic performance of ARFI in AP from inception to November 2023. STATA 14.0 was used to analyze the standardized mean difference (SMD) with 95% confidence interval (CI), pooled sensitivity, specificity, area under the curve, meta-regression analysis, sensitivity analysis, and publication bias. Nine studies, involving 533 AP patients and 585 healthy controls, were included. AP patients had significantly higher ARFI levels than healthy controls (SMD: 3.13, 95% CI: 1.88-4.39, P = .001). The area under the curve of ARFI for diagnosing AP was 0.99 (95% CI: 0.98-1.00), with 98% sensitivity and 94% specificity. Meta-regression identified the study region and study period as the sources of heterogeneity. Sensitivity analysis showed that the exclusion of any single study did not materially alter the overall combined effect. No evidence of publication bias was observed in the included studies. This meta-analysis demonstrated that ARFI exerted satisfactory diagnostic performance in AP.

Numerical prediction of mean flow and acoustic field of a supersonic impinging jet

The three-dimensional turbulent mean flow and acoustic field of a supersonic jet impinging on a solid plate is studied computationally using the general purpose CFD code Ansys Fluent. A pressure-based coupled solver formulation with the second order weighted central-upwind spatial discretization is applied to compute transient solutions. Cold and hot jet thermal conditions are considered. Mean flow characteristics are investigated by a steady-state modeling approach. Acoustic radiation of impingement tones is simulated using a transient time-domain formulation. The effects of turbulence in steady-state are modeled by the SST k-ω turbulence model. The Wall-Modeled Large-Eddy Simulation (WMLES) model is applied to compute transient solutions. The near-wall mesh on the impingement plate is fine enough to resolve the viscosity-affected near-wall region all the way to the laminar sublayer. Nozzle-to-plate distance is parameterized in the model for automatic re-generation of the mesh and results. Steady-state predictions of hover lift loss and mean jet velocity distributions are compared with experimental data, and favorable agreement is reported. The transient solution reproduces the mechanism of impingement tone generation by the interaction of large scale vortical structures with the impingement plate. The acoustic near-field is directly resolved by Computational Aeroacoustics (CAA) to accurately propagate impingement tone waves to near-field microphone locations. Calculated impingement tone frequencies and sound pressure levels agree with experimental values.

Calculating the acoustic radiation force on spherical particles in a standing ultrasound wave field considering single and multiple scattering

Ultrasound directed self-assembly (DSA) utilizes the acoustic radiation force (ARF) associated with a standing ultrasound wave to organize particles dispersed in a fluid medium into specific patterns. The ARF is a superposition of the primary acoustic radiation force, which results from the incident standing ultrasound wave, and the acoustic interaction force, which originates from single and multiple scattering between neighboring particles. In contrast with most reports in the literature that neglect multiple scattering when calculating the ARF, we demonstrate that the deviation between considering single or multiple scattering may reach up to 100%, depending on the ultrasound DSA process parameters and material properties. We evaluate a theoretical case with three spherical particles in a viscous medium and derive operating maps that quantify the deviation between both scattering approaches as a function of the ultrasound DSA process parameters. Then, we study a realistic system with hundreds of particles dispersed in a viscous medium, and show that the deviation between the ARF resulting from single and multiple scattering increases with decreasing particle size and increasing medium viscosity, density ratio, compressibility ratio, and particle volume fraction. This work provides a quantitative basis for determining whether to consider single or multiple scattering in ultrasound DSA simulations.

Axial and transverse acoustic radiation forces on an elliptical cylinder arbitrarily positioned in a cylindrical quasi-Gaussian beam

Axial and transverse acoustic radiation forces on an elliptical cylinder arbitrarily positioned in a cylindrical quasi-Gaussian beam

Acoustic radiation response of functionally graded sandwich plates cored by butterfly-shaped honeycombs with negative Poisson’s ratio

Acoustic radiation response of functionally graded sandwich plates cored by butterfly-shaped honeycombs with negative Poisson’s ratio

Method for vibration and acoustic radiation analysis of underwater stiffened plates with acoustic coatings

Based on the effective medium theory as well as the three-dimensional viscoelastic theory, a semi-analytical model of the three-dimensional underwater vibration and acoustic radiation with cavity-type stiffened plate structures covered with acoustic coatings is established to solve the issues related to underwater vibration and acoustic radiation calculation of the stiffened plate and shell structure with complex acoustic coatings. By comparing the far-field acoustic radiation characteristics of the proposed semi-analytical model and the finite element numerical model, this research verifies the validity and accuracy of the proposed model. On such a basis, this research preliminarily investigates the coupling effect exerted by stiffeners and parent plates in stiffened plates as well as the vibroacoustic characteristics of acoustic coatings, thereby providing a valuable idea for the prediction of vibroacoustic characteristics concerning underwater structures.

Nonlinear vibration and acoustic radiation of an internally resonant buckled beam

Although the nonlinear vibration of buckled beam has been thoroughly studied, its acoustic radiation does not get much attention. This paper deals with the nonlinear vibro-acoustic problem of an internally resonant buckled beam immersed in an infinite fluid. A finite element method based on an arbitrary Lagrangian-Eulerian framework is adopted to analyze the nonlinear interaction between the large-deformed buckled beam and the finite-amplitude acoustic waves in the fluid. The effects of acoustic pressure excitation, external harmonic excitation, and internal resonance on the vibro-acoustic responses of the buckled beam are discussed in the first and second primary resonances. It is found that the amplitude of the acoustic pressure can be comparable to the amplitude of the external harmonic force. This leads to an increase in the critical harmonic excitation amplitude for the occurrence of quasi-periodic responses and an increase in the second mode frequency component of quasi-periodic responses compared to the case neglecting the acoustic pressure excitation on the beam. Saturation phenomena are discovered in the second mode frequency components of beam displacement and acoustic pressure. Due to the 2:1 internal resonance, different time-frequency characteristics, quadrupole acoustic directivity patterns with low radiation efficiency, and dipole acoustic directivity patterns with high radiation efficiency can be observed at different harmonic excitation amplitudes and frequencies. Understanding these phenomena will help design loudspeakers and recognize sound sources.

The deep abdominal ultrasound transducer (DAX) increases the success rate and diagnostic accuracy of shear wave elastography for liver fibrosis assessment in patients with obesity-A prospective biopsy-controlled study.

Obesity impacts the diagnostic accuracy of shear wave elastography (SWE). A deep abdominal ultrasound transducer (DAX) capable of point (pSWE) and two-dimensional (2D)-SWE has recently been introduced to address this issue. We performed a prospective study in a cohort of mostly patients with obesity undergoing liver biopsy with a high prevalence of metabolic dysfunction-associate steatotic liver disease (MASLD). Liver stiffness measurement (LSM) was measured using vibration-controlled transient elastography (VCTE), as well as pSWE and 2D SWE on the standard (5C1) and the DAX transducers. We included 129 patients with paired LSM and liver biopsy: median age 44.0 years, 82 (63.6%) women, median BMI: 43.2 kg/m2. Histologic fibrosis stages: F0: N = 55 (42.6%), F1: N = 14 (10.9%), F2: N = 50 (38.8%), F3: N = 2 (1.6%), F4: N = 8 (6.2%). VCTE-LSM failed (N = 13) or were unreliable (IQR/median ≤30% in ≥7.1 kPa, N = 14) in 20.9% of patients. The Pearson correlation of reliable VCTE-LSM with both pSWE and 2D SWE was strong (all >0.78). The diagnostic accuracy for all LSM techniques was poor for significant fibrosis (≥F2, AUC: 0.54-0.63); however, it was good to excellent for advanced fibrosis (≥F3, AUC: 0.87-0.99) and cirrhosis (F4, AUC: 0.86-1.00). In intention-to-diagnose analysis, pSWE on DAX was significantly superior to VCTE-LSM. pSWE- and 2D-SWE enable the non-invasive identification of advanced fibrosis and cirrhosis in patients with obese MASLD. The use of the DAX transducer for acoustic radiation force imaging (ARFI)-LSM avoids technical failures in an obese population and subsequently offers advantages over VCTE-LSM for the evaluation of fibrosis in an obese MASLD population at risk for fibrosis.

Research on numerical simulation of tandem thrusters flow-induced noise

A tandem propeller is a kind of propulsion device that is installed on the outer axis and the inner axis with the same axis respectively and rotates positively and negatively. Taking DTMB tandem thrusters as an example, which consists of propeller3689 and propeller3849, the hydrodynamic characteristic simulation of the tandem thrusters is completed, using sound analogy theory. The simulation results are consistent with the experimental results. The speed distribution of the tandem thrusters and the hydrodynamic wake of the tandem thrusters are analyzed. Through the analysis of acoustic radiation characteristics, it can be concluded that the noise characteristics of tandem thrusters are more complex than those of ordinary propellers, and there are more line spectrum characteristics in them.

Ultrasound Viscoelastography by Acoustic Radiation Force: A State-of-the-Art Review.

Ultrasound elastography (USE) is a promising tool for tissue characterization as several diseases result in alterations of tissue structure and composition, which manifest as changes in tissue mechanical properties. By imaging the tissue response to an applied mechanical excitation, USE mimics the manual palpation performed by clinicians to sense the tissue elasticity for diagnostic purposes. Next to elasticity, viscosity has recently been investigated as an additional, relevant, diagnostic biomarker. Moreover, since biological tissues are inherently viscoelastic, accounting for viscosity in the tissue characterization process enhances the accuracy of the elasticity estimation. Recently, methods exploiting different acquisition and processing techniques have been proposed to perform ultrasound viscoelastography. After introducing the physics describing viscoelasticity, a comprehensive overview of the currently available USE acquisition techniques is provided, followed by a structured review of the existing viscoelasticity estimators classified according to the employed processing technique. These estimators are further reviewed from a clinical usage perspective, and current outstanding challenges are discussed.

A novel hybrid SBM-MFS methodology for acoustic wave propagation problems

In this paper, a novel hybrid meshless approach that combines the singular boundary method (SBM) and the method of fundamental solutions (MFS) to deal with two-dimensional (2D) exterior acoustic wave propagation problems is proposed and studied. The methodology is particularly devised to solve problems with complex boundary geometries containing geometric singularities such as corners and sharp edges. It employs the SBM to model intricate segments of these geometries and the MFS for the smooth ones. The proposed hybrid SBM-MFS method is studied in a 2D context in the framework of three benchmark examples involving acoustic radiation problems of circular-, square- and L-shaped objects in a full-space acoustic medium. In addition, the applicability of the proposed hybrid SBM-MFS methodology to predict the acoustic performance of a T-shaped thin barrier is also investigated. These examples are specifically designed to assess the feasibility, validity and accuracy of the hybrid SBM-MFS approach in comparison with the available analytical solutions and alternative numerical strategies such as the MFS, the SBM and the boundary element method (BEM). Numerical simulations demonstrate that the proposed method can match the level of accuracy of the MFS while keeps the robustness of the SBM when dealing with complex geometries, overcoming one the most important drawbacks of the traditional MFS. Moreover, the proposed hybrid SBM-MFS naturally avoids the non-uniqueness problem arising at the fictitious eigenfrequencies associated with the corresponding interior problems, a feature that neither the SBM nor the BEM inherently possesses.

Liquid surface depression and bubble generation by acoustic radiation

AbstractLiquid surfaces can be depressed by applying acoustic radiation force. The balance between the acoustic radiation force, surface tension force, and buoyant force sustains the stable dimple depression. Beyond a certain threshold, higher acoustic radiation force leads to instability and bubble formation. The bubble size is determined by the acoustic radiation force and the liquid surface tension. Effective management of bubble generation can be achieved by controlling acoustic radiation waves. A novel method for creating depression on liquid surfaces and generating bubbles is described, which requires neither gas supply nor direct contact with equipment.

A rapid prediction model for the radiation efficiency of baffled constrained layer damping plate

It’s well-known that constrained layer damping (CLD) can effectively reduce the vibration and radiation noise from the (plate-like or shell-like) thin-walled structures under various of dynamic excitations. As one of the key properties deciding the CLD’s performance, the CLD’s acoustic radiation characteristics has always been a focus of researchers. In this study, an analytical model based on equivalent principle is proposed to predict the acoustic radiation efficiency of the CLD plate. In this model, a laminated CLD plate is equivalent to a single-layer plate and the equivalent stiffness and loss factor are obtained using the strain energy method. The vibration velocity of the plate is calculated using mode-superposition method and the sound pressure on the plate surface is calculated using Rayleigh integral formula. Variable mesh sizes and frequency steps are employed to improve the calculation efficiency. The difference between the base and CLD plates in sound radiation characteristics is investigated using this model. The results indicate that CLD involving a damping layer with a low Young’s modulus can mitigate more vibration at low frequencies. A higher Young’s modulus of the damping layer results in a higher radiation efficiency of the CLD plate between the fundamental and critical frequencies. By increasing the loss factor, the spatially averaged mean square velocity would decrease, more modes would contribute to the response, and the CLD plate can consequently achieve a higher radiation efficiency below the critical frequency. Moreover, the simplified formulae for the average radiation efficiency of the CLD plate is developed to achieve the rapid calculation. Its accuracy is then validated by comparing the results to the more comprehensive model.

Enhancing acoustic levitation capacity through array geometry optimization

The contactless micromanipulation capability and microgravity environment provided by the acoustic levitation technology have excellent application prospects in many fields, such as droplet dynamics, solidification state physics, life sciences, etc. However, the applications are severely constrained by the limitation of the transducer power. In this paper, we explore an array geometry optimization framework to improve the levitation capability. First, the acoustic pressure attenuation and directional characteristics of commercial transducers are analyzed to uncover the mechanism of the array geometry affecting the acoustic radiation force (ARF). Second, based on the Gor'kov potential theory, the array geometry form of N-elements is derived, and the arrangement in the spherical ring (ASR) method is proposed to obtain the element coordinates. Then, spherical radius and array height are adjusted to obtain the optimal array geometry. On this basis, the directional angle of each transducer is further optimized. Finally, simulation and physical verification are carried out. The simulation results indicate that the ARF increases and then decreases with the spherical radius and array height, which are the existing maximum values. Directional angle optimization (DAO) can improve the ARF, particularly when the array height exceeds the sphere diameter. These findings are consistent with the analytical results. Notably, we built a prototype physical system, and the physical experiments showed that the optimized array improved the axial ARF by 201.2% and the radial ARF by 115.9% over the conventional array. The works presented in this paper offer a valuable design approach for acoustic levitation arrays, thereby contributing to the advancement and application of ultrasonic array levitation technology.

A Review of Ultrasonic Treatment in Mineral Flotation: Mechanism and Recent Development.

Ultrasonic treatment has been widely used in the mineral flotation process due to its advantages in terms of operational simplicity, no secondary pollutant formation, and safety. Currently, many studies have reported the effect of ultrasonic treatment on mineral flotation and shown excellent flotation performance. In this review, the ultrasonic mechanisms are classified into three types: the transient cavitation effect, stable cavitation effect, and acoustic radiation force effect. The effect of the main ultrasonic parameters, including ultrasonic power and ultrasonic frequency, on mineral flotation are discussed. This review highlights the uses of the application of ultrasonic treatment in minerals (such as the cleaning effect, ultrasonic corrosion, and desulfuration), flotation agents (such as dispersion and emulsification and change in properties and microstructure of pharmaceutical solution), and slurry (such formation of microbubbles and coalescence). Additionally, this review discusses the challenges and prospects of using ultrasonic approaches for mineral flotation. The findings demonstrate that the application of the ultrasonic effect yields diverse impacts on flotation, thereby enabling the regulation of flotation behavior through various treatment methods to enhance flotation indices and achieve the desired objectives.

Ultrasound Elastography in Benign Gynecology: A Scoping Review.

To perform a scoping review of the literature in which ultrasound elastography (UE) has been used in benign gynecology and identify avenues for its use in future research and clinical implementations. A structured search of EMBASE, Medline and Cochrane databases was conducted (last search date April 15th, 2022). Eligible studies included adult participants with female pelvic anatomy. English language papers focusing on the utility of ultrasound elastography applied to benign gynecology were included. Narrative reviews, conference abstracts, and letters to the editor were excluded. Two independent reviewers screened titles and abstracts for inclusion, a third reviewer was consulted in cases of disagreement. Study quality was assessed by a checklist for study implementation and elastography technique. Extracted data included elastography technology, gynecologic application, opportunities for clinical implementation, and strengths and limitations. The search returned 2026 studies. A total of 40 studies, published between 2013 and 2022, were retained for data extraction. Studies most frequently used shear wave elastography as the method of UE (n = 23), followed by strain elastography (n = 13) and acoustic radiation force impulse (n = 4). Most common clinical applications for UE were the diagnosis of adenomyosis and uterine fibroids (27.5%), assessment of pelvic floor muscle function (22.5%), and describing the elastic properties of polycystic ovaries (17.5%) and the uterine cervix (15.0%). Limitations of the technology were identified as the lack of published reference values for gynecologic organs and difficulties in assessing tissues deep to the transducer. Future research is needed to validate the use of ultrasound elastography in gynecology under both normal and pathologic conditions.

Compound Acoustic Radiation Force Impulse Imaging of Bovine Eye by Using Phase-Inverted Ultrasound Transducer.

In general, it is difficult to visualize internal ocular structure and detect a lesion such as a cataract or glaucoma using the current ultrasound brightness-mode (B-mode) imaging. This is because the internal structure of the eye is rich in moisture, resulting in a lack of contrast between tissues in the B-mode image, and the penetration depth is low due to the attenuation of the ultrasound wave. In this study, the entire internal ocular structure of a bovine eye was visualized in an ex vivo environment using the compound acoustic radiation force impulse (CARFI) imaging scheme based on the phase-inverted ultrasound transducer (PIUT). In the proposed method, the aperture of the PIUT is divided into four sections, and the PIUT is driven by the out-of-phase input signal capable of generating split-focusing at the same time. Subsequently, the compound imaging technique was employed to increase signal-to-noise ratio (SNR) and to reduce displacement error. The experimental results demonstrated that the proposed technique could provide an acoustic radiation force impulse (ARFI) image of the bovine eye with a broader depth-of-field (DOF) and about 80% increased SNR compared to the conventional ARFI image obtained using the in-phase input signal. Therefore, the proposed technique can be one of the useful techniques capable of providing the image of the entire ocular structure to diagnose various eye diseases.

Magnetic resonance elastography (MRE) outperforms acoustic force radiation impulse (ARFI) in predicting oesophageal varices in obese NAFLD cirrhosis.

Liver stiffness measurement (LSM) by transient elastography has been shown to underperform in high-risk varices (HRVs) prediction in obese non-alcoholic fatty liver disease (NAFLD) compensated cirrhosis (CC). LSM by magnetic resonance elastography (MRE) and acoustic force radiation impulse (ARFI) has been shown to be useful in prediction of oesophageal varices (EVs), but has limited evidence in obese NAFLD-CC. Obese patients with NAFLD-CC who underwent MRE and ARFI for LSM and endoscopy for screening of varices were enrolled. Performance of MRE and ARFI for predicting EVs or HRVs was evaluated using area under receiver operating characteristics (AUROC) curves and regression analyses were performed for predictor variables. One hundred eight patients [mean age 54.7 ± 9.6years, median BMI, 28.5 (26.4-30.0) kg/m2. 72.2% diabetics, 45.4% hypertensive] were enrolled. Fifty-two (48.1%) had no varices, while 29 (26.8%) and 27 (25%) had low-risk varices (LRVs) and HRVs, respectively. MRE-LSM was higher in patients with LRVs (p = 0.01) or HRVs (p = 0.001) against those without varices. ARFI-LSM did not differ significantly between those without and with LRVs or HRVs (p > 0.05 for all). There was a low correlation between ARFI-LSM and MRE-LSM in the overall cohort (r = 0.19). Only platelet count (PC) [0.98 (0.97-0.99)] and MRE-LSM [1.8 (1.26-2.79)] were predictors of HRVs. At a cut-off of 4.75, MRE showed a sensitivity of 96.3%. Model combining MRE-LSM with PC had a diagnostic AUROC of 0.77 and 0.76 for EVs and HRVs. In obese NAFLD-CC, MRE-LSM is significantly higher in patients with varices. MRE combined with PC predicts EVs and HRVs with better accuracy than ARFI.

Density-contrast induced inertial forces on particles in oscillatory flows

Oscillatory flows have become an indispensable tool in microfluidics, inducing inertial effects for displacing and manipulating fluid-borne objects in a reliable, controllable and label-free fashion. However, the quantitative description of such effects has been confined to limit cases and specialized scenarios. Here we develop an analytical formalism yielding the equation of motion of density-mismatched spherical particles in oscillatory background flows, generalizing previous work. Inertial force terms are systematically derived from the geometry of the flow field together with analytically known Stokes number dependences. Supported by independent, first-principles direct numerical simulations, we find that these forces are important even for nearly density-matched objects such as cells or bacteria, enabling their fast displacement and separation. Our formalism thus consistently incorporates particle inertia into the Maxey–Riley equation, and in doing so provides a generalization of Auton's modification to added mass, as well as recovering the description of acoustic radiation forces on particles as a limiting case.